Proper Car Wash/Interior Cleaning Detail

NOTE:The desciptions that I have provided are to the best of my cleaning and detailing experience. But due to some people not being able to follow directions properly, you are cleaning and detailing at your own personal trial, error and risk.

If this description does not make any sense to you, there are directions on the back of the bottles of Meguiars car care products. If you are still unsure, log onto the Meguiars website for more cleaning and detailing information.

How to wash and dry your car

1.Make sure your car is in the shade, has cool down, and or after the sun has finished setting. (this is the way I wash my car. Because I hate dry water spots and the way it fades your paint job when you wash your car in the hot heat and or when the sun is still up. And this is my personal secret to keeping my paint looking glossy for many more years to come)
2.Find a clean bucket
3.Pour in 1 ounce of Meguiars Gold Class Car Shampoo and Conditioner (1 gallon of water for every 1 ounce of washing detergent of your choice you plan on using)
4.Fill it up with luke warm water from your bath tub (remember luke warm water, not cold and or not hot)
5.Spray/soak the whole car down with water and rinse off as much dirt as you can (from the water hose)
6.Use a microfiber towel (a wash mitt from any auto parts store or a soft type of cloth of your preferred choice will be fine)
7.Dip the microfiber cloth/towel (wash mitt, or preferred choice of cloth/towel) into your detergent bucket and scrub away throuout the whole entire exterior of your car (starting from top of car, then work your way down towards the bottom)
8.Rinse off all the bubbles and or detergent suds from the exterior (starting from the top of the car, and work your way down)
9.Use another dry and or new microfiber towel or (chamois, or a soft type of cloth/towel of your choice) and dry off all to most of the water you can get. I don’t know about this one, nor would I recomend it, but my brother would just take his car for a drive on the highway, dry off most of the water from a high speed drive, and then drive back home to the driveway and continue drying off any water left on the exterior.
10. You are finish wasing and drying your car

How to clean and detail your (LEATHER) Interior

NOTE: if you have cloth interior, please use your preferred method of cleaning your cloth interior, for I will not be held liable and responsible for your own personal trial, error, and mistakes

1.Use a microfiber cloth/towel (or a 100% terry cloth/towel will work just fine…or a cloth of your preferred choice)
2.Lightly damp the microfiber cloth/towel or (a 100% terry cloth or a cloth/towel of your preferred choice) with water and wipe down your interior, dash board, door panels etc…your whole interior
3.Wait approximately 5-15 miuntes until your whole interior is completely dry (seats,dashboard and etc…)
4.Use Meguiars Gold Class Leather Cleaner and Conditioner (or your preferred choice)…(there are two types) 1.) liquid spray type that you spray onto your interior 2.) paste type where you apply onto your interior with a clean microfiber cloth/towel or clean 100% terry cloth/towel (I personally like to use the spray type…it’s more easy and convienent for me)
5.If you do decide to use the liquid spray type of Meguiars Gold Class Leather Cleaner and Conditioner. Spray it on any or all (leather surface) let it sit anywhere from 30 minutes to 1 hour to soak into and condition the surface of the leather interior (no more, and or no less) and wipe it down with a clean microfiber cloth/towel or 100% terry cloth/towel or (a cloth/towel of your preferred choice).
6.If you do decide to use the paste type of Meguiars Gold Class Leather Cleaner and Conditioner Use a clean microfiber cloth/towel or (a 100% terry cloth/towel) Apply the paste onto your clean microfiber cloth/towel, 100% terry cloth/towel or (your preferred choice of cloth/towel) Evenly apply and spread it on the (leather surface) interior, cleaning and conditioning your leather interior.
7.Let it completely dry
8.You are finish cleaning and detailing your leather interior

How to clean and detail your Vinyl/Rubber Interior type of surface

1.For cleaning and detailing a Vinyl/Rubber type of surface…repeat steps 1-3 from the how to clean your leather interior
2.Use Meguiars Gold Class Vinyl/Rubber Protectant . (I have only seen it in the liquid spray type) And use a clean microfiber cloth/towel, 100% terry cloth/towel or (preferred choice of cloth/towel)
3.Apply/spray it onto a clean mircofiber cloth/towel, 100% terry cloth/towel or (preferred choice of cloth/towel)
4.Evenly apply/spray onto the Vinyl/Rubber interior type of surface and wipe down with a clean micofiber cloth/towel, 100% terry cloth/towel or (preferred choice of cloth/towel)
5.You are finish cleaning and detailing the Vinyl/Rubber type of surface of your interior